HE351CW 4.4″ Turbo Turbine Guard

These are a direct bolt on turbine wheel guard that is mandatory typically when sled pulling and drag racing to keep everyone safe. This replaces having 3/8 or 1/2″ cross bolts put into your downpipe. This turbine guard is 3/8 wide cross design by 1 inch thick length wise. Made out of carbon 1045 steel. they will stop any turbine wheel that has failed and is trying to leave the turbo. They are made to Vband onto the rear of any 03-07 5.9 cummins he351cw turbocharger. the flange is 4.4″ on both sides. they can sandwich between the factory downpipe elbow. or can have a downpipe that is he351cw/4.4 Vband to them. This is a simple direct way but much stronger then normal cross bolts that you have to drill bolt through the downpipe.
They come with 1 turbine guard and one he351cw/4.4 clamp so you have everything needed for install.