HX40 4.0″ Turbo Turbine Guard

These are a direct bolt on turbine wheel guard that is mandatory typically when sled pulling and drag racing to keep everyone safe. Instead of having 3/8 or 1/2″ cross bolts put into your downpipe. This turbine guard is 3/8 wide cross design by 1 inch thick length wise. Made out of carbon 1045 steel. they will stop any turbine wheel that has failed and is trying to leave the turbo. They are made to Vband onto the rear of ANY HX40 or 4.0″ outlet turbocharger. the flange is 4.0″ on both sides. This HX40/4.0 flange is very commonly seen on s300 turbo swaps on duramax’s / cummins and powerstrokes. its a very universal style flange. HX40 downpipe can Vband to the rear of this turbine guard or you can weld a 4″ exhaust pipe to the rear of the turbine guard.
They come with 1 turbine guard and 1 HX40 clamp.