BASIC S300 T4 Second Gen High Mount Swap Piping Kit For 04.5-24 6.7 Cummins

This is our BASIC swap kit. This is not a complete turn key kit. This is a basic kit. What you see is what you get basically. You will need your own T4 angle exhaust manifold. You will need your own standard cover T4 S300 This does not come with any water lines or plugs. Does not come with oil feed or drain but is a option.  Pictures are not 100% accurate but what you will receive will be 100% correct though

What is included in our basic swap kit.

Stainless Steel 4″ Intake Pipe with Stainless Steel Bungs

Stainless Steel 3″ Intercooler Pipe for 90 degree cover or sxe  boot stlye connection only (NO VBAND Flanges) and 5ply boost boot if needed in that year application.

Stainless Steel Intake Pipe that has correct intake sensor bungs welded on. Intake boot and clamps and S&B air filter.

Comes with a 1/2 space for manifold. manifold must be flipped up.

Stainless Steel 4″ Downpipe/Mid Pipe. Wrapped in heat wrap. This downpipe is to be used with your factory downpipe without the cast iron elbow. You can use a 4″ or 5″ normal direct fit downpipe.

Optional. If YES you will get -4an Turbo feed line with fittings and a -12an Turbo drain line that is 25″ total.

All of these kits are built based off a Steed Speed T4 24V ANG manifold flipped up. There is no guaranteed fitment using another brand of manifold but they should be very close fitment wise!